In general, corrugate sidewall conveyor belt is used with conveyor which angle is ≥30°, and it can also used with belt conveyor for horizontal, short distance transportation(there will no separator in this case). Corrugate sidewall belt adopts base belt, sidewall and separator(no need in horizontal transportation) with trough no more than 0.03, and completed by twice vulcanization. Compared with similar products which are made by adherence, the corrugate sidewall conveyor belt by twice vulcanization has many advantages, such as high adherence, good flexing, separator not easy broken and dropped, which can extend the service life significantly.
Products Details
Package:
Quality Control:
Usage: it is suitable for mines, factories, ports, docks, long distance, high strength and heavy transportation.
Types: according to the properties of the cover: common type, flame resistant type, heat resistant type, cold resistant type, acid-alkaling type, oil resistant type.
Characters: high strength and high safety factor, small elongation and short distance of tension, strong combination of steel cord an'd rubber, good dynamic performance, soft belt body , good troughability and good performance in straight running, good resistant of impact, joint reliable and long service life.
1.Cover Grades
| Grades of cover |
Tensile strength/Mpa |
Elongation at break% |
Abrasion/mm³ |
| L |
15 |
350 |
200 |
| D |
18 |
400 |
100 |
| H |
24 |
450 |
120 |
| H1 |
25 |
450 |
90 |
| H2 |
28 |
450 |
90 |
| H3 |
30 |
450 |
90 |
| H4 |
35 |
450 |
90 |
2.Full thickness tensile performance
The vertical full thickness strength of belt is not smaller than the specified type in the form below. The minimum full thickness tensile strength (N/mm) = specified belt type
| specified belt type |
160 |
200 |
250 |
315 |
400 |
500 |
630 |
| 800 |
1000 |
1250 |
1600 |
2000 |
2500 |
3150 |
3.The full thickness vertical reference strength elongation of belt is no more than 4%
4.The adherence strength between plies
| item |
between the fabric plies |
between cover and belt cord |
| cover thickness between0.8-1.5mm |
cover thickness>1.5mm |
| Average of sample N/mm |
8.0 |
5.0 |
6.0 |
| Minium of sample N/mm |
7.0 |
4.5 |
5.5 |
FAQ
Q1. Are you a manufactuer?
Yes, we mainly produce Rubber conveyor belts and over 30 years.
Q2. What about the lead time?
1) 3--5 days for sample
2) 15--20 days for mass production.
Q3. How to pay?
1) T/T or L/C through bank account
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}